Description
Leofoto SOAR SO-362C Inverted Tripod
The Leofoto SOAR SO-362C Inverted Tripod is part of the Leofoto Inverted tripod series. Installation of these tripods is lightning fast due to the unique legs and they offer great ease of use. The inverted leg segments keep it stable under the most demanding conditions. The SO-362C reaches a maximum working height of 180 cm. In contrast, the minimum working height of this tripod is only 14 cm, which is fine for working low to the ground. Despite its light weight of only 2.77 kilograms, it has a carrying capacity of 40 kilograms.
The SO-362C tripod is made of 10-layer carbon and black anodized aircraft aluminum. This choice of material provides a perfect balance of strength and light weight. This tripod has two leg segments where the top leg segment has a diameter of 36mm and the second segment has a diameter of 40mm. The inverted legs increase stability compared to a regular tripod. The Twist-Lock twist locks are located in an easy to operate location due to the inverted system. The legs are easy to adjust: you turn the legs loose or tight with just one hand movement. Because this tripod can carry up to 40 kilograms, it is extremely suitable for shooting sports, huge telescopes and surveillance or camera equipment, for example.
The tripods from the Leofoto Inverted Tripod Series distinguish themselves by their enormous stability and, of course, the inverted extending tripod legs. In addition, they have a 75mm wide, removable tripod plate, but have no center column. Thus, vibrations are kept to a minimum and they are very sturdy. In addition, they all come with half-bowl, making them suitable for mounting a video head. Optionally, a center column is available to increase the maximum working height. On the sides and bottom of the stand plate there are UNC 3/8 screw holes to which a magic arm or smartphone can be attached.
- Toray 10-layer cross-rhombus pattern Japanese-made carbon fibre used for the tubes. 36/32mm diameters.
- Easy-grip rubberised leg locks are situated within easy reach of the camera, and well out of the way of mud and water.
- 3-position leg angles at 85, 55 and 23, enables ground level working at just 14cm.
- Maximum platform height of 180cm allows above eye-level operation of around 190-200cm with typical equipment (or eye-level if you’re very tall).
- Standard 75mm bowl design compatible with many different accessories such as levelling platforms.
- Supplied with a high quality carrying case which has room for an attached head, and leg spikes.
- No of sections: 2
- Maximum height: 180cm
- Lowest working height: 14cm
- Length closed: 108cm
- Weight: 2.27kg
- Maximum load: 40kg
- Head connection: 3/8″; 75mm bowl
- Top platform diameter: 75mm
