Description
Formatt Hitech Firecrest 100 Holder Kit+Firecrest IRND 100x100mm ND1.8 (6 Stop)
Two years in design and development has created the radical new type of holder system.
Innovative Use with Polarising Filters
The Formatt Hitech Firecrest 100 Holder mounts a 82mm polariser internally. Utilising a rotating 82mm adapter ring, the filter is easily turned using the control wheel on the side of the holder. Not only does it allow for a smaller, flatter and less cumbersome combination but the supplied Formatt Hitech Firecrest 82mm Ultraslim filter can be used on it’s own! With it’s highly efficient Firecrest Multicoating the filter reduces the danger of flare to a minimum
Innovative Use with Long Exposure Filters
Designed with long exposure filters in mind, specifically a new anti-reflection coating was developed and applied to the holder, components, and the special Outer Case to eliminate any residual light. The Firecrest Holder uses a aluminium back plate for stability and strength and is fitted with 2 filter slots for use with ND or ND Grad filters.
Innovative Flexibility
Unlike the existing holder systems on the market, the Firecrest has ONE 82mm adapter ring and then additional stepping rings are supplied to use down to a 67mm filter thread. Even smaller size rings are available if required. No longer is there a requirement for a Standard or Wide Angle Ring with the resultant cost and additional complexity.
What’s in the box;
Formatt Hitech Firecrest 100 Holder with 2 Filter Slots
Formatt Hitech Firecrest 82mm Ultraslim Cir-Polarising
Formatt Hitech Firecrest 100 82mm Adapter Ring
77-82mm Step-Down Ring
72-82mm Step-Down Ring
67-82mm Step-Down Ring
Two Part Outer Case
1x Pair Solid End Caps
1x Pair Vented End Caps
Formatt Hitech Firecrest 100 Pouch
+
Formatt Hitech Firecrest IRND 100x100mm Neutral Density ND1.8 ( 6 Stop ) Filter
Hand Made in the U.K.
